Digital Cinema Initiatives
COMPLIANCE TEST PLAN - COMPLIANT EQUIPMENT
« Previous Page
Note Regarding Direct-View Screens
As of December 02, 2023, CTP 1.4 will be in effect. CTP 1.4 contains image testing designed specifically for Direct View screen systems which previous compliance test plans lacked.
Existing Direct View devices listed on this page were tested prior to the development of CTP 1.4. It should be noted that they have been tested under the legacy Projector-based CTP which did not contemplate the specifics of Direct View technology. As such, these devices are largely untested with respect to image performance.
Manufacturers of such Direct View displays are encouraged to retest under CTP 1.4 (or later) to ensure their performance meets the requirements of the latest DCI Direct View Addendum.
DCI encourages consultation with additional industry experts to ensure a thorough understanding of the issues and limits with direct-view systems, including but not limited to sound reproduction.
click for full pdf
Notice pursuant to Section 2.3.2 of the Testing Authorization and Test Suite Licensing Agreement made and entered into as of September 16, 2022 by and between Digital Cinema Initiatives, LLC (DCI) and CineCert Inc.
To:
Chairman, DCI Member Representatives Committee
Chairman, DCI Technical Committee
|
Report Dated |
August 25, 2023 |
CTP Chapter |
Chapter 15. Digital Cinema Projector with MB Consolidated Test Sequence |
Equipment Tested
Manufacturer
Make
Model
Version |
Quantum Media Systems
D-Cinema Direct View Display
XDR-3090
Gen 3.5
(detailed version information below) |
Report Number |
DCI_Notice-CC-QM-XDR3090-20230825
|
Result |
No Failures Detected |
Version Detail:
Quantum Media Systems XDR-3090
Module |
Version |
CTP v1.2.1 Chapter 15 |
|
Projector with Permanently Married Media Block |
|
|
|
Direct View Display System Identification |
|
Manufacture |
Quantum Media Systems |
D-Cinema Direct View Display Model |
XDR-3090 |
D-Cinema Direct View Display Serial Number |
309010231 |
D-Cinema Direct View Video Processor Model |
XDR-VP7 |
D-Cinema Direct View Video Processor Serial Number |
VP710143 |
|
|
Media Block Identification |
|
Manufacture |
GDC Technology, Ltd. |
Model |
SRC-5500 |
Serial Number |
G48940, A53963 |
|
|
MB Hardware Module Identification |
|
MB Board |
M/N Z-OEM-G5S-M1-2U 4NM00658, 4NM00647 |
|
|
MB Software Version Identification |
|
FIPS Firmware Version |
5.1 |
Security Manager Version |
1.8.6 |
MediaBlock Firmware Version |
9.1 |
Forensic Marking Supplier |
NexGuard |
Image Forensic Mark Version |
3.14 |
Audio Forensic Mark Version |
2.14.0 |
|
|
SMS Software Identification |
|
SMS Version |
19.30 |
OS Version |
OS-SR7U-1.0.0 |
|
|
RAID Storage Identification |
|
Manufacturer |
GDC Technology Limited |
Model |
PSD-3000-U2 |
|
|
Serial Number |
U28693 |
Disk 1 of 4 |
|
Manufacturer |
Western Digital |
Model Number |
DC HA210 SATA 6Gb/s |
Part Number |
1W10002 |
Serial Number |
WCC6N1YR008C |
Firmware |
RAGNWA09 |
Disk 2 of 4 |
|
Manufacturer |
Western Digital |
Model Number |
Model Number |
Part Number |
1W10002 |
Serial Number |
WCC6N4UEFZ20 |
Firmware |
RAGNWA09 |
Disk 3 of 4 |
|
Manufacturer |
Western Digital |
Model Number |
Model Number |
Part Number |
1W10002 |
Serial Number |
WCC6N6YFERZV |
Firmware |
RAGNWA09 |
Disk 4 of 4 |
|
Manufacturer |
Western Digital |
Model Number |
Model Number |
Part Number |
1W10002 |
Serial Number |
WCC6N1YR01PH |
Firmware |
RAGNWA09 |
|
|
Direct View Display Hardware Identification |
|
LED Cabinet |
XDR090G3 |
LED Module |
LM090 |
HUB Board |
HUB-63L |
Power Supply |
P300W18 |
Receiving Card |
Q-50 |
Firmware |
V1.2.0.16 |
|
|
Video Processor Hardware Identification |
|
Mother Board |
M13-94V-0 |
Power Supply |
UHP-350-12 |
Processor Board |
E117942 |
Sending Board |
BPWB-10100 |
Software |
V1.0.0.S1.T1.V1 |
Firmware |
V1.1.0 |
MAC |
54:b5:ff:19:00:33 |
U-Boot |
20220715-db99844014 |
System |
V1.1.B0.T1 |
BSP |
V1.0.0.T3 |
Xserver |
origin/master |
MCU |
V1.1.0.cl4k-40p |
FPGA |
V110_dblvds |
|