Digital Cinema Initiatives
COMPLIANCE TEST PLAN - COMPLIANT EQUIPMENT
« Previous Page
Note Regarding Direct-View Screens
As of December 02, 2023, CTP 1.4 will be in effect. CTP 1.4 contains image testing designed specifically for Direct View screen systems which previous compliance test plans lacked.
Existing Direct View devices listed on this page were tested prior to the development of CTP 1.4. It should be noted that they have been tested under the legacy Projector-based CTP which did not contemplate the specifics of Direct View technology. As such, these devices are largely untested with respect to image performance.
Manufacturers of such Direct View displays are encouraged to retest under CTP 1.4 (or later) to ensure their performance meets the requirements of the latest DCI Direct View Addendum.
DCI encourages consultation with additional industry experts to ensure a thorough understanding of the issues and limits with direct-view systems, including but not limited to sound reproduction.
|
 click for full pdf
AEGISOLVE, INC.
10133 Sherrill Blvd. Suite 110
Knoxville, TN 37932 USA
Tel: 650.386.1436 | Fax: 650.386.1495
Notice pursuant to Section 2.3.2 of the RESTATED AND AMENDED TESTING AUTHORIZATION AND TEST SUITE LICENSING AGREEMENT made as of January 1, 2017 by and between Digital Cinema Initiatives, LLC (DCI) and AEGISOLVE, INC.
To:
Chairman, DCI Member Representatives Committee
Chairman, DCI Technical Committee
|
Reporting date |
September 29th, 2023 |
Name of Testing Organization |
AEGISOLVE, INC. |
Address of Testing Organization |
10133 Sherrill Blvd. Suite 110
Knoxville, Tennessee 37932 USA |
Name of Test Operator |
Travis Spann |
Name of Test Subject Representative |
Leyard Optoelectronic Co., Ltd. |
Address of Test Subject Representative |
No.9 Zhenghongqi West Street, North of Summer Palace, Haidian District, Beijing, China, 100091 |
Make and model of Test Subject |
|
Manufacturer |
Leyard Optoelectronic Co., Ltd. |
Make |
Digital Cinema Direct View Display with Media Block |
Model |
LDC4K-10 with IMS3000 (CID1002) |
Version |
(detailed version information below) |
Certificated Devices |
|
Manufacturer |
Leyard Optoelectronic Co., Ltd. |
Make |
Digital Cinema Direct View Display |
Model |
LDC4K-10 |
Serial Number |
64100011 |
Version |
(detailed version information below) |
|
|
Manufacturer |
Dolby Laboratories, Inc. |
Make |
Image Media Block |
Model |
IMS3000 (CID1002) |
Serial Number |
369752 |
Version |
(detailed version information below) |
|
|
Manufacturer |
Dolby Laboratories, Inc. |
Make |
SMS |
Model |
CID1002 |
Serial Number |
369752 |
Version |
(detailed version information below) |
|
|
Test procedure performed |
Chapter 15: Projector w/IMB (Proj + IMBSMS)
Excluded Feature: Projector Overlay |
Test status |
No Failures Detected |
IMB or IMBO is MMB capable |
N/A |
SMS is MMB capable |
N/A |
This notice shall not be used to claim product certification, approval, validation, or endorsement by AEGISOLVE, INC. or any agency of the Federal Government. This document may only be reproduced in its entirety without revision. The results only relate to the item(s) tested.
|
System #1 |
IMS3000 (CID1002) |
|
Hardware Revision |
IMS3C |
|
|
Firmware/Software revisions and
Details |
|
Product name |
IMS3000 |
Serial number |
369752 |
Firmware Version |
3.3.43-0 |
Normal firmware |
3.3.43-0 (active) |
Alternate firmware |
3.3.43-0 |
Software Version |
3.3.43-0 |
Watermark video |
Dolby 0.3 |
Watermark audio |
Dolby 4.3.2 |
Audio Engine |
Dolby 1.3.15 |
SM version |
3.3.43-0 |
Board Type |
regular |
Bundle Version |
3.3.43 |
|
|
Storage |
Integrated (3 drives RAID5)
DRM_IMS_HDD‐1 |
|
|
Digital Cinema Direct View Display
Firmware Identification |
|
MB_MCU(DDC/DDSE) |
V2.1.0 |
MB_MCU(BOOT) |
V2.0.0 |
TX_MCU |
V2.0.11 |
TX_FPGA |
V0.0.30 |
ICP_FPGA |
V0.0.8 |
|
|
Digital Cinema Direct View Display Hardware Identification |
|
Model |
LDC4K-10 |
Serial Number |
64100011 |
|
|
|
|
LED Cabinet-Main
Hardware Identification |
|
Model |
LDC4K-10-01 |
Number of Cabinets |
1 |
Serial Number |
641000110001 |
|
|
LED Cabinet- Slave
Hardware Identification |
|
Model |
LDC4K-10-03 |
Number of Cabinets |
95 |
Serial Number |
641000111001-641000111095 |
|
|
Direct View Display Hardware
Identification |
|
Model |
LDC4K-10 |
Resolution |
4096x2160 |
Number of cabinets |
96 |
Number of LED Module per Cabinet |
12 |
LED pixel pitch (mm) |
2.5 |
Screen dimension (horizontal x vertical in meters) |
10.24x5.4 |
Screen dimension (horizontal x vertical in feet) |
33.60x17.72 |
|
