Digital Cinema Initiatives
COMPLIANT EQUIPMENT
« Previous Page
Note Regarding Direct-View Screens
As of December 02, 2023, CTP 1.4 will be in effect. CTP 1.4 contains image testing designed specifically for Direct View screen systems which previous compliance test plans lacked.
Existing Direct View devices listed on this page were tested prior to the development of CTP 1.4. It should be noted that they have been tested under the legacy Projector-based CTP which did not contemplate the specifics of Direct View technology. As such, these devices are largely untested with respect to image performance.
Manufacturers of such Direct View displays are encouraged to retest under CTP 1.4 (or later) to ensure their performance meets the requirements of the latest DCI Direct View Addendum.
DCI encourages consultation with additional industry experts to ensure a thorough understanding of the issues and limits with direct-view systems, including but not limited to sound reproduction.
|
 click for full pdf
Notice pursuant to Section 2.3.2 of the Testing Authorization and Test Suite Licensing Agreement made as of October 1, 2022 by and between Digital Cinema Initiatives, LLC (DCI) and DMC Institute, Keio University.
To:
Chairman, DCI Member Representatives Committee
Chairman, DCI Technical Committee
|
Reporting Date |
May 12, 2023 |
Report Number |
KEIO-Unilumin-UCA42-20230512 |
Name of Testing Organization |
DMC Institute, Keio University |
Name of Test Operator |
Kunitake Kaneko |
Name of Test Subject Representative |
Unilumin Group Co., Ltd |
Address of Test Subject Representative |
Yongfu Rd #112, Qiaotou Village, Fuyong Town, Baoan District, Shenzhen, China |
Test Subject |
Manufacturer |
Unilumin Group Co., Ltd |
Make |
D-Cinema Direct View Display |
Model |
UC-A42 |
Certificated Devices |
Proj/IMB
(permanently married) |
GDC Technology, Ltd. SRC-7500 (GDC-IMB-v6) 1.8.6 |
SMS |
GDC Technology, Ltd. SRC-7500 (GDC-IMB-v6) 19.1 |
Test Procedure Performed |
Compliance Test Plan Version 1.2.1
Chapter 15: Projector w/IMB (Proj + IMB + SMS)
Excluded Feature: Remote SPB Support |
IMB or IMBO is MMB capable |
N/A |
SMS is MMB capable |
N/A |
Result |
No Failures Detected |
Version Detail:
Unilumin Group Co., Ltd, UC-A42 |
Digital Projector with Media Block |
P/N |
UC-A42 |
S/N |
A42223710001, A42223710002 |
|
Media Block Identification |
GDC Technology, Ltd. SRC-7500 |
Model |
GDC Technology, Ltd. SRC-7500 |
S/N |
A53721, A72623 |
|
MB Hardware Module Identification |
MB Board |
M/N GDC-IMB-v6
S/N 4NM00598, 4NM00510 |
|
MB Software Version Identification |
FIPS Firmware Version |
5.1 |
Security Manager Version |
1.8.6 |
MB Firmware Version |
9.1 |
Forensic Marking Solution |
NexGuard Watermarking |
Audio FM Version |
3.14 |
Video FM Version |
2.14.0 |
|
SMS Software Identification |
OS Version |
OS-SR7U-1.0.0 |
SMS Version |
19.10 |
|
Storage Module Identification |
|
Model |
ESL-3000 |
S/N |
EL00008 |
Number of HDD |
3 |
HDD Model |
Western Digital
HUS726T4TALE6L4 |
Direct View Display Identification |
Unilumin Group Co., Ltd UC-A42 |
Display Model |
Unilumin Group Co., Ltd UC-A42 |
S/N |
A42223710001, A42223710002 |
|
Display Hardware Modules Identification |
Interface Board Identification |
Hardware Module |
IB-4120-V1 |
FPGA Version |
V1.0 |
|
LED Modules Identification |
Hardware Model |
P3.33-9645154-1010N-2225-V1.0 |
Number of LED Modules per Cabinet |
12 |
Number of Cabinets |
176 |
|
Receiver Cards Identification |
Hardware Model |
RX300
HUB01-681N-2217-V1.1 |
Receiver Type |
RX300 |
Software Version |
V5.0 |
|
Signal Adaptors |
Model |
UNI-SN0002-V1.1-R |
|
Interface Board Power Supply Unit |
Model |
SUPLET
LAF400-220S12W-A |
|
LED Module Power Supply Units |
Model |
MEGMEET
MUP200WLT-3.8 |
|
